Custom Action Figures- General Hurst Romodi

After watching Rogue One a few times I have had the uncontrollable urge to begin completion of certain subjects of my action figure collecting. I went back and started gathering some more of the Imperial officers present at the Death Star briefing in A New Hope. Fortunately Hasbro tackled a few of the officers in their SAGA boxset. Aside from the box set there had been a fantastic figure of Admiral Motti made during POTF2 which I customized and wrote about in a previous blog entry. But we were still missing General Hurst Romodi who popped up again in Rogue one as well as Trech Molock. Also on my list of figures to make are two of the Imperial Security Bureau officers that walk by the Death Star elevators in A New Hope.

 General Romodi would be the first of the two ANH officers that I would tackle to complete the briefing. Facilitating this is the (I think) Fantastic Director Krennic body that came out in the new Rogue One toy-line. Do I wish it had more than 5 Points of articulation? Sure do. But am I happy with it as an easy base to customize Imperial Officers? ABSOLUTELY!!! The base figure has great proportions a nice detailed sharp sculpt and can be easily modified and painted.

After trimming off the holster from his skirt portion his whole body was sanded with a fine grit sanding pad and he was then washed with a mild kitchen soap to remove any oils and release agents he may have had from handling and molding. His rank badge was trimmed in half to get a single row of six studs.

I had to source a new head for him and luckily I had a Vintage Collection Darth Sidious head rolling around in my spares box (His body was turned into the ROTJ Emperor in a previous blog entry). The head had all the hair trimmed off including eyebrows and was then sanded down and smoothed with a q-tip soaked in lacquer thinner. He was then completely repainted except for his eyes. I declined to sculpt his very thin hair opting instead to simply paint it on with an ultra fine brush in layers to give it the look I wanted to achieve. I looked to reference from the new Rogue One Visual Guide for how to paint his features, as well as any reference stills I could find of the original character form ANH. I think I wound up striking a nice balance.

Paints used were all Testors Model Master acrylics. They had great adhesion once the plastic was washed and sanded. They also brush on wonderfully smooth. Neutral gray was used on the fabric portions of his uniform, it strikes a nice balance with the grays of the other officers from Hasbro. His uniform was also shaded in some deep areas with Vallejo model color paints, Green-Grey and Grey Black, to add some visual interest. He was finished off with a light coat of Krylon Matte spray to seal him up and help avoid paint rub.

Next up were the two gentleman from the Imperial Security Bureau. They were painted to a lesser degree, but were still a fun 2 day project. I began again with the awesome Krennic body from the 5 POA line.They had their holsters cut off and the skirt portions were sanded and smoothed with lacquer thinner. The badges were cut off, which in retrospect was not the greatest choice, while I made replacements form styrene, they came out a little chunky in comparison. I plan to potentially redo them at some point.

The officers also had belt boxes added made from styrene chips. I had looked at options for adding hats to the figures and pricing it out, I just didn't want to spend the money on trying to get heads wearing hats, whether they be resin casts or plucked form fodder figures. SO I sculpted the hats from Apoxie Sculpt. I wound up really happy with them. Once cured, the circular hat device was added from a slice of styrene rod. The heads themselves are both Indiana Jones heads from the 2008 figure line. They fit perfectly onto the bodies, and with some slight mods and paint (Bushy 70's sideburns were important!) they looked different enough next to each other, one had a mustache added with Apoxie Sculpt.

All in all, these three figures make a great addition to the imperial side of things and I'm super excited to continue finishing off some more baddies using the new figures from Rogue One. Ahead on my slate I'd like to try to make some more officers seen throughout the Death Star, including the officers wearing pants and shoes instead of breeches and boots, i'd also like to take a stab at the greatcoat officers seen on Jedha before the Death Star attack.

Coming up sooner than that are my Grand Moff Tarkin repaint, Trech Molock and my more articulated K-2SO, as well as some Marvel Comics custom figures.

Custom Action Figures - Imperial Officers (Admiral Motti/Captain Piett)

For whatever reason, I absolutely love the Imperial Officers of the original Star Wars films. In recent years we have been lucky to get a fair few officers in one form or another and most of them have been pretty good. In fact I actually quite liked even the Admiral Motti figure that was made way back in POTJ. He had a tremendous facial sculpt and his articulation was clean and necessary, he could do exactly what he did in the movie.

Over the years though I was able to acquire a few extra Captain Needa bodies and said what the hell, Removing the old Motti head I dremelled it out and mounted it on the new body. I also cut away his rank plate and glued it into place on the Needa body, his hands were replaced with some from the spares box. Now he can take his place next to Grand Moff Tarkin as they threaten to blow up planets.

Admiral/Captain Piett is another figure who seems a bit underrepresented in the modern toy line. He had quite a role in two movies yet has only had one figure made of himself in all this time. Like Motti the sculpt is quite good on his one release so I figured I would simply repurpose the POTF2 head. Little else is done to him, his rank badge is adequate to depict him in either film and the Needa figure was wearing gloves so that essentially completed his look.

Overall, these were some simple and quick modifications that helped to bring these characters into the new millennium, and fit them into the modern lineup.

Custom Action Figure- Imperial Probe Droid

 A character that has been in dire need of an update for years... yet never seems to get one. The Imperial Probe droid or Probot is in my opinion one of the most maligned characters in the entire Star Wars line.  This isn't some cantina character or background player in Jabba's palace. This guy's appearance opens The Empire Strikes Back and he plays an integral role in the plot.

Fortunately in spite of it's many faults the oft released POTF2 Probot is actually quite a good base to begin modifying into a more accurate figurine. He has all the basic parts and really just needs a few basic tweaks to bring him up to snuff.

Beginning with removing his obtrusive action featureHe can then have his head mounted to the body and can be puttied and sanded to remove some of his larger glaring seams. At this point it is great to pull out the reference material and figure out where everything belongs and what needs to be added to  accurize him.

I worked on smoothing and adding an eye here or there which was definitely needed. Also I deepened some of the rivet holes peppering his armor plates. Then I proceeded to begin placing Greeblies around the perimeter of his main body.

Various parts like miniature tanks and wires were fabricated from styrene sheet and rod and glued to him using cyanoacrylate. His neck was extended with a styrene spacer.

 Again more details were added and holes were cleaned out with a pin vise.

This panel was cut out and deepened and a new faceplate was made for it which matched reference photography. Also greeblies were assembled to replicate his little blaster mounted on top of his body. A small underhanging greeblie was also built which hangs off the lower edge of his trunk.

Looking directly underneath a large styrene blank was cut and shaped to cover the large recess on the bottom of his body left over from his action feature. This area is relatively undetailed on the actual miniature so it was left smooth.

The legs were pretty great if unarticulated but they still feature some nice crisp detailing. However in the pursuit for more accuracy and a better looking figure, I drilled out all the pistons on his legs and replaced them with small steel nails. The legs were all removed and the bare metal nails masked before painting.

Finally it was time to paint! A base coat of Rustoleum Anodized Bronze was applied to the whole figure, this was left to dry for 24 hours. Ordinarily I wouldn't use enamel spray paint on an action figure due to it reacting poorly with the base plastics used. Luckily the Probe Droid is made of sterner stuff and could take the heavier paint. Once dry I applied a wash of acrylic black over the whole figure and then very lightly dry brushed with gunmetal over the whole figure. The details were picked out with gloss black for the eyes and the small technical markings throughout were painted with a bright orange. Finally it was all sealed and the figure was reassembled.

As a finishing touch, two pins were cut to length and glued in place as antennas. He turned out pretty good looking if I say so myself and makes for a great updated piece in my collection, for not much more than 10 dollars.

Custom Action Figure- The Emperor

Here's another very necessary custom. The Emperor! Hard to believe I had to resort to this, but I have just never been satisfied by any of the commercially available Emperor figures. In fact the closest thing to a fantastic toy he has had is actually the Hallmark ornament of him in his chair. I display that proudly amongst his many cronies. But as far as a standing emperor I had to customize to get what I wanted.

Starting with the VC79 Vintage Collection Darth Sidious as a base I proceeded to ditch his Palpatine head and replace it with something a little more withered. The best ROTJ sculpt I have seen is actually the SAGA release of the Emperor from 2003. Usually this sculpt is marred by a godawful paint job but underneath all that is is incredibly faithful to his onscreen look. Nice and crisp.  The only real problem is that it is an incomplete head. But once placed under the hood, it makes no difference.

Further alterations to the VC79 Sidious included trimming and shaping the plastic cowl around his head. Also adding his cane from the SAGA Figure. Finally his cloak was soaked in warm water then shaped and left to dry. Lastly all the flesh parts were painted to match his onscreen look. My favorite thing about him is the dry papery look that I achieved with his skin. I hated the way the prequels made him look rubbery and lumpy rather than ancient and dessicated.

Custom Action Figure - Jango Fett

My custom Jango Fett is something I have wanted to complete for a LONG time now. I loved the new Vintage Collection body, but I was sick of the removable helmet because it looks so squished and nothing like the one used in the movie. However the mission series figure had a great looking head. Nice and wide like the actual film helmet, also it had great bright silver paint apps and nice bright detailing. As a bonus it came with Jango's arena jetpack, of which I didn't have one yet.

After chopping off Jango's head (Look ma just like Mace Windu!) I dremelled out the underside and added a cavity for the neck balljoint to fit into.

His Arena Jetpack was relatively under detailed, so I wound up repainting the whole thing. It is worth noting that Testers Model Master Acrylic Steel is a perfect match for the factory silver color of Jango's armor. While I was dremelling his helmet I also drilled out his jetpack rocket nozzles.

 The only real tweaks I had to make to the helmet were to paint his blue stripe around the back and to
paint black on the underside that was ground out .

The final addition to this figure was sort of another bonus from the Mission series figure. Jango's blasters were replaced with those of the mission series figure. They had a great bright silver color to them and the only thing I did to change them was to add some clear orange to the tip and the sides of the barrels to give them a coppery look. I then cut off the Blades from his gauntlets and called this one finished. I finally have my ultimate Jango Fett figure and the best part is I can still swap his parts out with all his original bits.

VIPER MKII

 One of the greatest redesigns in history the Viper MKII. Gorgeous and functional this workhorse of the colonial fleet is a straight up killer!

 My MK II is done up in Starbucks markings. (The tail numbering is 7242 Nebula Constellation, the bird William Husker Adama flew in the first colonial war.)

One of the striking features of the Vipers, new and old, is their Orange and Red striping. Rather than fumble my way through decaling the ship and having cracked lifting decals I painted the striping on as I did with my classic Viper. This involved a not terrible amount of masking (try painting the aztec paneling pattern on a Refit Enteprise!)

The engine access ports were enhanced with some light piping inserted using small guage copper wires. The areas were then masked off and painted in metallic grays and deepened with washes and some metallic drybrushing.

The cockpit was fabulous right out of the box, I added some wires over the headrest to bring it a little closer to "as seen on screen". It was also painted throughout to match pictures from the big Battlestar prop auction of the shooting cockpit.

The pilot was a challenge in itself, Not wanting to lose any detail of the fine resin cast figure, I painted the metallic green flightsuit in fine, smooth, very light coats. I tested numerous colors out on spare plastic and figures before I settled on the colors for the flightsuit and vest. The suits were then given an overall drybrushing of silver and gold to give them an iridescent look that maintained their small scale.

Finally deatils were picked out in various colors and patches were applied before thefigure was given an overall wash of dark brown and black to deepen the recesses.

 Some More detail of the Cockpit interior.

Weatheirng on the MK II was kept light, you want the ship to look flyable, not dilapidated. Rather than blast marks the ship was given an overall look of wear that is more akin to wear and tear from maintenance than battle. Light dusting of sooty black color and charcoal dust, and lots of tiny paint chipping on high surfaces and panel edges. The red stripes were also chipped away and scuffed with some steel wool to apply wear and tear.

 Like on the MK VII the thruster were drilled out and deepened with black paint and given directional streaking with charcoal dust before being sealed with clear satin. The panel lines and mechanical areas were then washed with black to deepen the recesses.

VIPER MK VII

Another model photo feature!

Today's kit of choice is the Moebius models Mark VII Viper from the new Battlestar Galactica series.

 I built this kit about a year ago and it went together like a dream! One of my favorite craft from the New Series (which isn't saying much because I quite frankly love all of them!)

The real challenge with most of the Moebius Battlestar kits is in the detailing and finishing, as they practically fall together out of the box.

 I decided to mark this one up as Apollo's MK VII since I made my MK II into Starbucks bird. Thus the appropriate nomenclature was chosen from the excellent decal sheet which gives plenty of options for pilots.

The hull color is kind of tricky with this bird. It is somewhere between gray, silver and blue. I think I struck a nice balance by mixing Tamiya Light Blue with a dash of silver and some white. This was sprayed over the pre shaded hull. The next tricky part is in the weathering.

 As seen in the series, the MK VII typically has a chipped and blasted exterior as though the paint has worn off the high surfaces all over the ship. I first went in and deepened the panel lines with a was of black run throughout and I also made sure to spread it out of the panel lines a bit in areas. I then attacked each panel with a brush loaded with silver. Moving in random chipping patterns around the panel edges and in some high spots where wear would likely occur. Once this was dry I then used a fine steel wool to knock back the brushed on acrylics. This flattened them out a bit and brought the chipping effect down to scale.

Once the silver chipping was done another light wash of black tied all the weathering together.

 

The engine cluster was a special case. First a steely color was mixed and airbrushed over the black pre-shaded nozzles. Then they were drybrushed with lighter silver. After all this was dry, I airbushed in light layers Clear yellow, red and blue. This built up filters of color which helps to make the metal look heat treated and worn without just looking dirty, sort of the same effect you see on Mufflers and exhaust pipes.. A light wash of a rusty brown was applied to again top the weathering and tie it all together. 

After all the special weathering was done with paint, I attacked a few areas to make blast marks/contacts. In specific one series of blast marks runs over the ship as though it was strafed from port-fore to starboard aft. These hits are given directional streaks of soot running from their initial silver contact points. It is better not to over do these kinds of things as you want the ship to still look flyable.

The maneuvering thrusters and gun emplacements were also deepened with black paint and given some directional streaking with charcoal powder and a q-tip. This was all finally sealed with clear satin paint before the decals were applied and the model was placed onto it's stand.

All in all a beautiful ship to add to the shelf, and lots of fun to put together!